Coral Ceramics Logo

📐 Comprehensive Material Consumption Calculator

Based on the surface measurements or the total square meters of your project, this tool will provide an exact calculation of the ceramic material required (number of pieces and boxes). Remember that calculating boxes requires knowing the box content beforehand.

The calculation of adhesive (cement-based) and grout paste consumption is an **estimation** and may vary slightly depending on surface conditions.

Specify the **dimensions** (cm), **thickness** (mm), usage **ratio**, and **pieces per box** for each format.
Then, enter the **total area** (Sq. M) and the **grout parameters**.

⚠️ **Important Note:** Depending on the tile arrangement, tile consumption may increase.


Room Measurements (Optional, if Total Area is not used)

Length required.
Width required.
Please enter a valid area.

Tile Dimensions and Ratio

Grout and Adhesive Parameters

Adhesive Consumption and Installation

Add a % for cuts and breakages. **Recommended: 5% to 10%**.

Grout Paste Consumption

Enter the joint width in mm.
Typical density 1500-1800 kg/m³.